상품 상세보기 : 저항측정기 Ohm Meters

The Micro-Ohmmeter Model 5600 performs reliable low resistance measurements

The Micro-Ohmmeter Model 5600 performs reliable low resistance measurements with test currents to 10 A and resolution to one micro-ohm.

The Model 5600 uses a four-wire Kelvin bridge method, which eliminates test lead resistance for a measurement accuracy of 0.25%. A reverse polarity switch compensates for the effect of DC voltage interference on the accuracy and permits reading averaging. A built-in circuit filters against AC signals.

The Micro-Ohmmeter Model 5600 is housed in a sealed field case. Power is supplied by a long-life NiCad battery with a built-in charger (70/220V). The large, easy-to-read LCD is 18 mm high; it displays the value of resistance, and indicates overrange and reversed connection of measurement leads.

Four LEDs on the front panel indicate measurement faults (open circuit, blown fuse, etc.); thermal protection; low battery and battery charging.

For operator safety and instrument protection, the micro-ohmmeter is fuse protected at the inputs. Two fuses, accessible on the front panel, protect against stored energy in inductive loads.

Enhanced internal circuitry protect against kickback when the current is shut off. A built-in thermal switch protects the micro-ohmmeter against overheating on the 10 A range when in continuous use.

Features

Four-terminal Kelvin resistance measurement
10A test current
0.25% basic accuracy
1µ ohm resolution
Direct reading, easy to operate
Six selectable ranges
Reverse polarity switc
Overload and input fuse protection
Automatic decimal point and zero
Rechargeable NiCd battery (70/220V)
Rugged field case for industrial applications

CAT NO.

MODEL

DEscRIPTION

AVAIL

PRICE

AE917462

5600 (1431.01)

MICRO-OHMMETER (10A)

Yes

5,389,200

AE917463

1017.82

OPTIONAL TWO KELVIN PROBE W/BANANA PLUGOUTPUT (UP TO 10A) FOR Digital 10A Micro-Ohmmeter

Yes

356,227

All probes come with 10ft. Color coded leads

AE917464

1017.83

OPTIONAL 1 A KELVIN CLIPS WITH SPADE LUG TERMINATIONS FOR Digital 10A Micro-Ohmmeter

Yes

278,640

All probes come with 10ft. Color coded leads

AE917465

5600 (1017.84)

OPTIONAL Large 10 A clips with spade lug terminations FOR Digital 10A Micro-Ohmmeter

Yes

429,840

All probes come with 10ft. Color coded leads

AE917466

2960.12

OPTIONAL 6 VOLT RECHARGEABLE NiCAD BATTERY P/N 2960.12 FOR Digital 10A Micro-Ohmmeter

Yes

431,892

AE917467

2118.32

OPTIONAL SOFT CARRYING BAG FOR ACCESS. P/N 2118.32 FOR Digital 10A Micro-Ohmmeter

Yes

64,692

AE917468

2118.52

OPTIONAL Kelvin Probes (20 ft. Spring Loaded) FOR Digital 10A Micro-Ohmmeter

Yes

429,840