자동로그인
 

현재위치 : Home > DAVIS (상품 25000개) > 음성 데이터 Voice/Data > 통신 Telecom

DAVIS 종합 계측기 - 한국대리점 코린스계기(주)
 
ID761 Basic Version Cable Certification Tester
    · 고객선호도 :
    · 제조사 : DAVIS
    · 제품번호:ID761
    · 시중가격 :
    · 판매가격 :
    · 포 인 트 :
    · 수 량 :


회원이 되시면 가격변동정보, 신제품, 특판제품, 기술정보등 다양한
뉴스정보를 보내드립니다.
배송은 평균 2~3일정도 예상됩니다.
                    (0)                     (0)                     (0)
The Series 6 & Series 7 are fully compliant Category 6/ ISO E and Category 7/ISO F
The Series 6 & Series 7 are fully compliant Category 6/ ISO E and Category 7/ISO F with frequency ranges up to 350Mhz and 750Mhz respectively. Full graphical autotests are performed as quickly as 25 seconds for 250Mhz and 35 seconds at 600Mhz cable.
Both units utilize an advanced link adapter method to reduce cost of ownership. The Series 6 & Series 7 are both packaged with Category 6/ISO E channel adapters and the Series 7 also includes two Category 7/ISO F channel adapters. These channel adapters fit into the case of the unit and are locked into place. This creates a stable and repeatable testing platform while eliminating bulky adapters extending beyond the end of the units. By simply plugging in the appropriate patch cord to the channel adapter you can now perform permanent link testing. Should the plug on the patch cord ever wear out you can simply purchase a new patch cord rather than the entire assembly greatly reducing the lifetime cost of ownership.
Available accessories include the industry’s most advanced fiber options, FIBERTEC and TEACETEK. FIBERTEK enables loss, length, bi-directional testing over two fibers, and talkset over fiber capabilities for 850 and 1300 nm Multimode and 1310 and 1550 nm Singlemode fiber. TRACETEK is the first fiber accessory for a copper tester that will trace a fiber run, locate distance to events along the fiber, and measure the magnitude of the event. This capability can eliminate the need for a more costly OTDR in campus network environments.

Series 6P & Series 7P Premium kits include all of the components of the "B" kit plus:
– Hard carrying case replaces soft case – PCMCIA adapter – 32MB compact flash – USB port flash reader for PC – 2 extra batteries for a total of 4 – External dual bay battery charger
 
Features
  • Series 6 is fully compliant with Category 6/ISO E draft standards and tests with graphs in approximately 25 seconds
  • Series 7 is fully compliant with emerging Category 7/ISO F standards with a frequency range up to 750 Mhz and graphical tests in 35 seconds
  • Both Series 6B & Series 7B share the following:
  • 1/4 VGA color screen on main unit and two-line LCD on remote unit
  • Serial and USB ports for uploading tests and upgrading firmware
  • Two full-function PCMCIA slots accept compact flash memory and provide for future capabilities
  • Soft carrying case
  • LANTEK reporter software
  • USB and Serial cables
  • Two talksets and two AC adapters
  • User manual
  • 2 Category 6 channel adapters and patch cords with Series 6
  • 2 Category 6 and 2 Category 7 channel adapters and patch cords with Series 7
 
SPECIFICATIONS
Internal memory No graphs approximately 6,000 tests With graphs approximately 100 tests
External memory 32MB compact flash No graphs approximately 24,000 tests With graphs approximately 400 tests
External memory 256MB compact flash No graphs approximately 192,000 tests With graphs approximately 3,200 tests
Standard test compliance ANSI/TIA/EIA 568B, Category 6 (draft), ISO C/D and ISO E/F (draft), AS/NZS 3080, IEEE 802.3
Ethernet, EN50173, EN50173A1
Cable types UTP/ScTP/FTP
CAT 3/5e/6/7 (Series 7 only); ISO C/D/E/F (Channel, Basic, and Permanent Link)
IBM STP Type 1,2,6,Coax
Dimensions 10.1" x 5.0" x 2.3" Display and remote
Weight 2.3 lb. Display 2.0 lb. Remote 1.2 lb Battery
Battery Packs NiMH rechargeable
Typical operating life (battery) 8 hrs
Max. Operating Temp. 0°C-50°C degrees
Max Storage Temp. -20°C to +70°C degrees
Humidity 5-90% noncondensing
Series 6/7 Range Resolution Accuracy
Length (50-100Ω cable) 0-2000ft 1ft ±(3% + 3ft)
Delay 0-8000 ns 1ns ±(3% + 1ns)
Average Impedance 35-180Ω 0.1Ω ±(3% + 1Ω)
Capacitance (bulk) 0-100 nF 1pF or 3 dig ±(2% + 20 pF)
Capacitance 0-100 pF/ft. 0.1 pF ±(2% + 20 pF)
DC Loop Resistance 0-200Ω 0.1Ω ±(1% + 2Ω)
Attenuation 1-350 or 750** MHZ 0.1 db Level III*
NEXT 1-350 or 750** MHZ 0.1 db Level III*
Return Loss 1-350 or 750** MHZ 0.1 db Level III*
ELFEXT 1-350 or 750** MHZ 0.1 db Level III*
Noise Floor <-90 dB
Dynamic Range >90 dB 
 *Level III only specified to 250 MHz
** Series 7 only

CAT NO. MODEL DEscRIPTION AVAIL PRICE
ID761   LANTEK 6B   Basic Version Cable Certification Tester   Yes   12,949,200
Call for pricing on Tracetek and Fibertek options
ID762   LANTEK 6P   Premium Version Cable Certification Tester   Yes   15,109,200
Call for pricing on Tracetek and Fibertek options
ID771   LANTEK 7B   Basic Version Cable Certification Tester   Yes   15,109,200
Call for pricing on Tracetek and Fibertek options
ID772   LANTEK 7P   Premium Version Cable Certification Tester   Yes   17,269,200
Call for pricing on Tracetek and Fibertek options
번호 제목 작성자 작성일 평가점수
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다.
 
* 이 상품을 사용해 보셨다면 사용후기를 써 주십시오.
번호 제목 작성자 작성일 답변
이 상품에 대한 질문이 아직 없습니다.
궁금하신 사항은 이곳에 질문하여 주십시오.
 
* 이 상품에 대한 궁금한 사항이 있으신 분은 질문해 주십시오.
이 상품과 관련된 상품이 없습니다.
DAVIS 종합 계측기 - 한국대리점 코린스계기(주)
 
회사소개 | 서비스이용약관 | 개인정보취급방침
주소 : 경기도 성남시 중원구 둔촌대로 474, 708호 (상대원동 선텍시티1)
Tel : 031-777-1588 / Fax : 031-777-1587 / 개인정보관리책임자 : 관리자
사업자 등록번호 : 116-81-31753 / 통신판매업신고 : 2005-경기성남-0886호
대표자 : 홍영화 / 운영자 : 윤상미
상호 : 주식회사 코린스 / Copyright ⓒ 2002. All Rights Reserved.
가입사실확인