These DC-powered, fixed ranged, multi channel signal conditioners
Original ActionI/Q Series These DC-powered, fixed ranged, multi channel signal conditioners and isolators offer stable 0.1% accuracy over operating ambient temperature range of 20° to 80°C. Their multi-channel design ensures high density and low material cost. Plug-in terminal sockets makes wiring quick and easy. To isolate a powered 4-20mA loop, the Q500 loop powered isolator is available for one, two or four channel applications. Direct DC inputs, voltage or current can be specified by range for the Q501 two-wire transmitter with 4-20mA output, available in one or two channels. The Q510 two-wire transmitter provides two or four RTD input channels and the Q520 two-wire transmitter provides two channels for the most popular thermocouple types and ranges. For voltage output signals (e.g. 0-10V) three-wire transmitters can be used. The Q414 and Q415 provide two RTD channels and either 4-20mA or 0-10V output signals, respectively. The Q424 and Q425 are two channel, thermocouple input, three-wire transmitters. Since three-wire transmitters use two wires for power and one wire for the output signal, which is referenced from the negative power supply terminal, the cost saving I/QRail can be employed. The I/QRail can distribute power to two, four or eight modules, saving wiring time on up to sixteen channels of I/O.
AC ActionI/Q Series The AC-powered ActionI/Q Series of four-wire transmitters offers many of the most advanced microprocessor and ASIC based signal conditioning solutions available. Field configurable and wide ranging, these modules are an off the shelf solution for most isolation, signal conditioning and limit alarm applications. The benefits enjoyed by the users include lower spares inventories and quick availability for DC, RTD, thermocouple, potentiometer, strain gage, AC and frequency input signal applications. Push button calibration with Action’s unique TouchCal technology provides benefits in terms of increased stability, higher repeatability and accuracy since it replaces adjustment potentiometers, which can be thermally sensitive and mechanically less reliable. Additional cost of ownership benefits are realized in terms of reduced calibration time from TouchCal technology and wiring savings from the I/QRail. The I/QRail is used to power all AC ActionI/Q modules and provides an added level of safety. For temperature measurement, the model Q486 with patented Instant Accuracy cold junction compensation technology, is twice as accurate and four times as stable as older temperature measurement instruments. It can be field configured using DIP-switches or PC configured, which reduces set up time to seconds.
DC Action I/Q The DC Action I/Q Series is very similar to the AC ActionI/Q product line. The DC ActionI/Q line is DC powered, accepting 9 to 30V. The DC-powered I/QRail is optional since the DC Action I/Qs have both DC power terminals as well as the power rail connector, unlike the AC ActionI/Q.
CAT NO.
MODEL
DEscRIPTION
AVAIL
PRICE
ACT1060
Q106-0
DC Input, Field Configurable Limit Alarm, Dual Trip, 100 - 240V AC
Yes
594,000
ACT1080
Q108-0
DC Input, Field Configurable Limit Alarm, Dual Trip with TouchCal Technology, 9-30V DC
Yes
529,200
ACT1160
Q116-0
RTD Input, Field Configurable Limit Alarm, Dual Trip, 85 – 265V AC
Yes
594,000
ACT1260
Q126-0
Thermocouple Input, Field Configurable Limit Alarm, Dual Trip, 85 – 265V AC
Yes
594,000
ACT4060
Q406-0000
DC Input, Multi Channel, Field Configurable Isolator, 85 – 265V AC
Yes
680,400
ACT4080
Q408-0000
DC Input, Field Configurable, Isolating Signal Conditioner, with TouchCal, 9 - 30V DC
Yes
529,200
ACT4360
Q436-0
Potentiometer Input, 4-wire transmitter, 85 - 265V AC
Yes
680,400
ACT4380
Q438-0
Potentiometer Input, Field Configurable signal conditioner, 9 - 30V DC
Yes
583,200
ACT4660
Q446-0
Bridge Input, isolating 4-wire transmitter, 85 - 265V AC
Yes
680,400
ACT4480
Q448-0
Bridge/Strain Gauge Input, Field Configurable isolator, TouchCal Technology, 18 - 30V DC
Yes
583,200
ACT4660
Q446-0
Bridge Input, isolating 4-wire transmitter, 85 - 265V AC
Yes
680,400
ACT4680
Q468-0
AC Input, Field Configurable Isolator, TouchCal Technology, 9 - 30V DC
Yes
583,200
ACT4760
Q476-0
Frequency/Pulse Input, Isolating Signal Conditioner, 85 - 265V AC
Yes
680,400
ACT4780
Q478-0
Frequency Input, Field Configurable, Isolating Signal Conditioner, with TouchCal, 9 - 30V DC
Yes
604,800
ACT4860
Q486-0001
Temperature (RTD, thermocouple, mV, Ohm) Input, Isolating Signal Conditioner, 85 - 265V AC
Yes
712,800
ACT4880
Q488-0001
Temperature Input, Field Configurable, Isolating Signal Conditioner, with TouchCal, 9 - 30V DC
Yes
572,400
ACT5001
Q500-1
Loop Isolator (4-20mA), Single Channel (Multi-channel Optional, Loop Power
Yes
378,000
ACT5011
Q501-1B00
Isolating 2-wire Transmitter, 4-20mA Input, Single Channel (Dual Channel Optional), 12 - 35V DC
Yes
561,600
ACT50113
Q501-1B03
Isolating 2-wire Transmitter, 0-10V Input, Single Channel (Dual Channel Optional), 12 - 35V DC
Yes
561,600
ACT200
IQRL-200
I/QRail Power Distribution Bus
Yes
Call 031-777-1588
ACT20021
IQRL-2002
Extra I/Q Rail, Power Distribution Bus for 2 AC Action I/Q
Yes
43,200
ACT20041
IQRL-2004
Extra I/Q Rail, Power Distribution bus for 4 AC Action I/Q
Yes
151,200
ACT20081
IQRL-2008
Extra I/Q Rail, Power Distribution bus for 8 AC Action I/Q
Yes
205,200
ACT002
IQRL-D002
DC Power Distribution Bus for 2 DC Action I/Q Modules
Yes
75,600
ACT004
IQRL-D004
DC Power Distribution Bus for 4 DC Action I/Q Modules
Yes
162,000
ACT008
IQRL-D008
DC Power Distribution Bus for 8 DC Action I/Q Modules
Yes
205,200
ACT03
MD03
TS35 x 7.5 DIN Rail (2 meters)
Yes
108,000
ACT031
MB03
End Bracket for MD03
Yes
12,960
ACT905
G905
24VDC Power Supply (0.5 Amp)
Yes
334,800
ACT910
H910
24VDC Power Supply (1.0 Amp)
Yes
324,000
ACT915
H915
24VDC Power Supply (2.3 Amp)
Yes
388,800
번호
제목
작성자
작성일
평가점수
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다.
현재위치 : 
개
