 |
The only Capture Hood Kit for
Air Balancing you will ever need |
 |
 |
 |
 |
 |
A highly specified, light weight, one man operated solution for commissioning and balancing air volume flow at grilles, linear slots and diffusers. Accurate for both supply and extract ProHood saves time and money on HVAC commissioning while helping create an energy efficient and healthier environment. With an incredible choice of SIX Fabric and THREE Plastic Hood sizes and a detachable anemometer look no further than ProHood.
THE PROHOOD ADVANTAGE
- Displays air Volume flow, Velocity and Temperature in SI, Metric or Imperial measurements
- No mistakes with colour coded fabric hoods for easy identification
- Free calibration certificate to international standards
- Hoods designed to comply with latest European grille size recommendations
- Easy read, tilting, backlit meter indicates supply or extract flow
- Use in any orientation for wall, ceiling and floor grilles
- ATD value input automatically adjusts for grille correction factors
- Highly accurate - even at low flows - no plate changes required
- Detachable air flow meter for every day use with a choice of vane 35mm and 100mm diameter sensors
- Pre-assembled hood frames save time on site (unlike metal kits)
- Auto zero, memory, avg/max/min/sum, STP, RS232 for Windows®
- So compact basic kit fits in a 'carry aboard' flight bag
- Perfect for commissioning, facilities managers, health and safety specialists, test engineers, ventilation contractors and consultants
 |
 |
| A MASTERPIECE OF FUNCTIONALITY AND EASE OF USE FOR FAST, ACCURATE, AIR BALANCING |
- Choice of six durable, collapsible fabric hood sizes
- Option of three plastic hoods for smaller grilles
- Three fixed opposed handles for ease of handling with finger tip control button
- Detachable anemometer with 100mm and 35mm vane sensors and articulating telescopic probe
- Superbly featured air meter with 'real time' and 'recall modes', duct dimensions and area inputs
- Adjustable display damping for fluctuating flows
- Temperature measurement direct from hood and vane sensor
- No low flow screens to remove and replace Leak tight, tear resistant, nylon hoods with air cushioned grille seals
- Hoods interchangeable with other leading makes
- Tilting, back-lit flow meter fully protected for on-site knocks
- True ambient readout or STP corrected readings
- Direct download into Windows® software or to portable mini printer
- Calibration certificate, carry case and batteries supplied
- Exceptional value for money.
SPECIFICATIONS
| Volume Flow |
85 to 4078 m3/hr
24 to 1133 L/sec
50 to 2400 CFM |
Velocity Range
(using 100mm vane) |
0.25 to 30 m/sec
50 to 6000 ft/min |
| Temperature Range |
0 to 800C
320 to 1760F |
| ATD Factor Input |
0.1 to 9.0 |
Accuracy
(calibrated better than) |
Supply ± 3% of reading ± 12 m3/hr
Exhaust ± 4% of reading ± 12 m3/hr |
| Display Resolution Volume |
1 m3/hr 1 1/sec 1 CFM |
| Velocity |
0.01 m/sec 1 ft/min |
| Temperature |
0.010C 10F |
| Memory Locations |
99 |
| Digital Output |
RS232 |
| Operating Range |
0 to 500C |
Weight (Instrument and
610x634mm Hood) |
3.8kg (8.3lbs) |
| Compliance |
CE, EMC 89/336/EEC
EN50081-1, EN50082-1 | |
 |
 |
| Standard Kit |
Instrument, Meter
Hood 610 x 634mm
Carry Case
Batteries and Certificate of Calibration traceable to International Standards. |
| Optional |
Fabric Hood 410 x 434mm (Red)
Fabric Hood 310 x 1234mm (Yellow)
Fabric Hood 310 x 1534mm (Orange)
Fabric Hood 610 x 1234mm (Blue)
Fabric Hood 910 x 934mm (Grey)
Plastic Hood* 180mm Dia
Plastic Hood* 285 x 235mm
Plastic Hood* 330 x 330mm *Use with 100mm vane sensor
100mm Vane Sensor
35mm Vane Sensor
Telescopic Vane Extension Probe 0.4 to 1.1m
Apu 10 mini Printer
Various PC cables for direct interface/download with Windows® Software |
|
현재위치 : 
